| Main Page | Shadow Forums | Motorcycle Links | Shadowrider's Photo Gallery | Today's Posts | New Posts |



DO NOT POST NUDITY OR PORN OR IT WILL BE DELETED! Thank you.

  
Go Back   Shadowriders > Main Discussions > Bike Discussion / Shop Talk
User Name
Password
Reply
 
Thread Tools Display Modes

Odd stuff going on after drilling slides
Old 10-09-2016, 02:48 PM   #1
anesthesia
Shadow God
 
anesthesia's Avatar
 
anesthesia is Offline
Join Date: Dec 2005
Location: Denver
Posts: 556
Send a message via Yahoo to anesthesia
Odd stuff going on after drilling slides

The bike has been popping a bit just cruising, not accel or decel, so I figured I'd check the carbs sync and while I was in there decided to drill the slides.
I did this at work and on the ride home didn't really notice any difference on the ride home (about 3 miles).
The bike sat for 2 days and when I rode it to work, it was leaking oil out of the front cylinder while the engine was running. Did that for two days then stopped. Took it for a ride around town a couple of days ago and after maybe five miles of riding, it started letting out some pretty good random pops, mainly just cruising 35-45 mph in 3rd gear. After a bit I noticed I was having to open the throttle more to maintain speed.

After another 10-15 miles it let out some loud pops one after the other and at a stop light I noticed some white smoke drifting out of the rear pipe. I pulled off to check that the air cleaner and all that stuff was tight and there were no vacuum leaks. The boot from the rear carb to the air cleaner had come loose, tightened it up and headed home. Since then, I have no zip on the throttle. Have to go almost wide open starting from a dead stop and on the highway, it took a good quarter mile plus to get up to 55.

Any ideas? The only change I made was drilling the slides.

Also, The bike sat for 5 years. So I had the carbs taken apart, cleaned and looked over a few months back. Everything has been ok since then aside from the random pops.
__________________
People just ain't no good
I think that's well understood
You can see it everywhere you look
People just ain't no good----Nick Cave
  Reply With Quote

Old 10-09-2016, 04:20 PM   #2
gb6049
Shadow God
 
gb6049's Avatar
 
gb6049 is Offline
Join Date: Jun 2008
Location: Wiesbaden, Germany
Posts: 1,582
Never was a big on drilling the slides after reading on carb adjustments. Double check the A/F setting? Did you adjust the the jet size to account for the more rapid delivery of fuel? You might also check you oil to make sure you did not have a float stick and flood the the cylinder with gas and into the oil?
  Reply With Quote



Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -4. The time now is 04:50 PM.


vBulletin skin developed by: eXtremepixels
Powered by vBulletin® Version 3.6.7
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.