| Main Page | Shadow Forums | Motorcycle Links | Shadowrider's Photo Gallery | Today's Posts | New Posts |



DO NOT POST NUDITY OR PORN OR IT WILL BE DELETED! Thank you.

  
Go Back   Shadowriders > Honda Shadow Discussion Forums > How-To Guides
User Name
Password
Reply
 
Thread Tools Display Modes

Bar-mounted Turn Signal Switches
Old 12-12-2013, 06:44 PM   #1
Rarick513
Noob
 
Rarick513's Avatar
 
Rarick513 is Offline
Join Date: Aug 2013
Posts: 23
Bar-mounted Turn Signal Switches

Hey guys! For those who are interested in cleaning up your bars and removing all bulky and ugly stock switches housing but concerned about having practical and usable turn signal switches on the bars. Especially here in California where the motorcycle cops like to hassle you for everything So I came up with a pretty great solution. Through out my whole time building my bike I was having a hard time figuring out a way to mount a turn signal switch. I first tried by buying a old oem harley switch off ebay like the one here:
http://www.ebay.com/itm/1-HARLEY-OEM...d1be2d&vxp=mtr
This switch was a complete piece of garbage in my opinion, it was so stiff you could hardly push it up or down and then one of the positions stopped working all together, so i threw it in the trash. So I shared this link so none of you make my same mistake and waste 25 bucks! ha

From there I came up with my own custom way to mount some switches in the style of new oem harley with push button switches for each signal at your thumbs.

first I purchased two of there:
http://www.allelectronics.com/make-a...HBUTTON/1.html

From there i went to my local hardware store and picked up 4 rubber grommets with a 3/8" inner diameter, 1/2" mounting diameter, and a 5/8" overall outer diameter. I then marked where I wanted the buttons and drilled out 1/2" hole through the front and back of the bars and fitted the holes with the rubber grommets. I wired up my switches like so using some disconnect connect terminals i also got at the hardware store. I spliced the grey wire into two wires then added the 4 female ends of the connectors of each wire.



From there I attached the wires to each switch, added the male ends to each wire and covered the wires with some black braided loom and heat shrink and ran the wires through the bars. I removed the nut and lock washer from the switches and "threaded" them into the rubber grommets, which worked great. You could always tap the bars to fit the threads of the switches but the rubber grommets were much easier, and looked very clean, in my opinion. I didn't take any pictures of the process but its pretty simple to figure out.





Notice the rivets i used to plug the holes where i drilled to mount that old school harley turn signal switch..
__________________

Last edited by Rarick513 : 12-12-2013 at 06:58 PM.
  Reply With Quote

Old 12-12-2013, 06:50 PM   #2
Rarick513
Noob
 
Rarick513's Avatar
 
Rarick513 is Offline
Join Date: Aug 2013
Posts: 23


And the finished product!





NOTE: This mod will not work with running lights. For this mod i did away from the three other cables from the stock switch for the running lights and am using just 2 wire after market turn signals.
__________________
  Reply With Quote

Old 12-12-2013, 06:53 PM   #3
custm crzy
Made In The USA
 
custm crzy's Avatar
 
custm crzy is Offline
Join Date: Dec 2012
Location: South GA
Posts: 1,629
i like it..
__________________
03 ACE 750
05 vlx bobber (The wifes)
06 FLHXi Street Glide
1980 KZ750 bobber/chopper project
07 KX250F


  Reply With Quote

Old 12-12-2013, 11:04 PM   #4
BaldEagle
SROC President
 
BaldEagle's Avatar
 
BaldEagle is Offline
Join Date: Oct 2010
Location: Memphis, TN
Posts: 6,545
Not bad, I like the idea.
__________________

www.baldeaglecustoms.com

Then the prophet Isaiah called on the LORD, and the LORD made the
SHADOW... 2 Kings 20:11
Okay, I know it's a little out of context, but still we have proof that God cr
eated the Shadow!!!

  Reply With Quote

Old 12-13-2013, 08:30 AM   #5
bob_suruncle
Ace Rider, SROC Brother
 
bob_suruncle's Avatar
 
bob_suruncle is Offline
Join Date: Sep 2011
Location: Ontario, Canada
Posts: 2,009
interesting idea.... I like it!
__________________
  Reply With Quote

Old 02-03-2014, 12:20 AM   #6
Nerd
Noob
 
Nerd's Avatar
 
Nerd is Offline
Join Date: Jan 2014
Location: Vancouver,WA
Posts: 30
I'm going to try your idea. I dig the look you made your bike into. My Bobber goal is something similar to yours.
__________________
"The truth is incontrovertible. Malice may attack it; ignorance may deride it. But in the end -----There it is...." Winston Churchill
  Reply With Quote

Old 02-03-2014, 06:41 PM   #7
mcvierh
Debased Pseudo God
 
mcvierh's Avatar
 
mcvierh is Offline
Join Date: Feb 2007
Location: West Carolina
Posts: 7,749
Not bad at all.
Good to have some old/new positive shit to do.........
__________________
"A sin of omission is a sin we should have commited but didn't."

<<< ostentatious isn't it!
  Reply With Quote

Old 05-09-2014, 06:13 PM   #8
bobsnewdirection
Shadow Rider
 
bobsnewdirection is Offline
Join Date: Mar 2010
Location: rockledge pa
Posts: 89
Send a message via AIM to bobsnewdirection
I did something like that but made switch housings out of alum conduit to hold the switch. Makes it so u can internal wire the bars
  Reply With Quote

Old 08-21-2015, 06:59 PM   #9
05ss45
Noob
 
05ss45 is Offline
Join Date: Aug 2015
Location: Mass
Posts: 1
I like it a lot!
  Reply With Quote

Old 08-24-2015, 10:14 PM   #10
Myriad_Rocker
Shadow Master
 
Myriad_Rocker's Avatar
 
Myriad_Rocker is Offline
Join Date: Aug 2015
Location: Fayetteville, AR
Posts: 169
Very nice work. I may "borrow" this idea from you, but is there a button out there that will allow the use of the running lights as well?
__________________
Myriad Rocker

2007 Honda Shadow VLX600
- done for now, but here's the bobber build

Last edited by Myriad_Rocker : 08-25-2015 at 10:37 PM.
  Reply With Quote



Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump



All times are GMT -4. The time now is 06:26 PM.


vBulletin skin developed by: eXtremepixels
Powered by vBulletin® Version 3.6.7
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.